阿克苏科目四考试英文版

1. How to ensure safe driving at night?

A. Drive at speed limit

B. Cut speed and drive carefully

C. Maintain the current speed

D. Drive above the speed limit

Answer: B

2. Once inflammable gas causes a fire disaster, it should be put out with water in good time.

A. Right

B. Wrong

Answer: B

3. When driving on a rough road, the driver should use low gear to keep low speed; try to choose roads with big pits to reduce bumpy feeling.

A. Right

B. Wrong

Answer: B

4. When driving a motor vehicle ready to enter a congested roundabout, the wrong measure is to ______.

A. Honk to indicate another vehicle to yield

B. Stop to yield

C. Driving into the congested intersection

D. Drive fast into the intersection

Answer: ACD

5. How should lamps be used when motor vehicle drivers pass through a two-way tunnel?

A. Turn on the hazard lamps

B. Turn on the high-beam

C. Turn on the fog lamp

D. Turn on the low-beam

Answer: D

6. Which of the following measures is correct for rescuing a person sustaining full-body burns?

A. Cover the fire with sandy soil

B. Spray cool water to his body

C. Put out the fire by extinguisher

D. Help to remove the burning clothes

Answer: B

7. When a motor vehicle reaches a muddy or burst-and-muddy section of the road, the driver should stop, observe and select a level and solid section or a section with vehicle tracks.

A. Right

B. Wrong

Answer: A

8. When a motor vehicle passes over an inundated road drivers should change to a high gear and pass rapidly.

A. Right

B. Wrong

Answer: B

9. When approaching a sharp curve, motor vehicle drivers should reduce speed only after entering the curve.

A. Right

B. Wrong

Answer: B

10. How will the adhesive force of road change when speed increases on a damp and slippery road?

A. Increase sharply

B. Increase gradually

C. Decrease sharply

D. No change

Answer: C

11. What is the purpose of checking before driving?

A. Confirm whether the tyres of motor vehicles are damaged or not

B. Confirm whether there is a safety hazard near the vehicle.

C. Confirm whether there are obstacles around the vehicle

D. Confirm whether the road in front of the vehicle is safe

Answer: ABCD

12. What should the driver do when he/she encounters an oncoming ambulance in the same lane?

A. Keep to the side and reduce speed or stop to yield

B. Drive ahead by occupying another lane

C. Yield by speeding up and changing lanes

D. Drive ahead in the original lane

Answer: A

13. What is the meaning of this sign?

A. Bypass from left side

B. Continuous curves

C. Sharp left curve

D. Sharp right curve

Answer: C

14. What is the meaning of this sign?

A. Muddy road

B. Low-lying road

C. Overflowing road

D. Ferry

Answer: C

15. How to follow a motor vehicle safely on the road?

A. Observe the front vehicle conditions

B. Drive on the left side of the road as far as possible

C. Be ready to slow down at any time

D. Keep a safe distance

Answer: ACD

16. Which is the wrong measure to avoid tire burst?

A. Reduce tire pressure

B. Check tires regularly

C. Remove foreign matters from the tire tread grooves timely

D. Replace tires that have cracks or deep cuts

Answer: A

17. When a fast-moving vehicle encounters an emergency the driver should turn to evade first and then brake to slow down so as to mitigate the damage.

A. Right

B. Wrong

Answer: B

18. What is the meaning of this sign?

A. Watch for pedestrians

B. Crosswalk

C. Village or town

D. Primary school

Answer: C

19. What is the meaning of this sign?

A. No going straight and no changing to left lane

B. No going straight and no left turn

C. Allowed to go straight and change to left lane

D. No going straight and no right turn

Answer: D

20. The drivers, loaders and supercargoes responsible for dangerous chemicals transportation should all full understand the chemical characteristics, potential risks, features of the packaging containers and emergency measures for any unexpected accidents.

A. Right

B. Wrong

Answer: A