广州英文驾考科目四

1. When the vehicles cross each other at night, what should the driver do if the vehicle coming in the opposite direction don’t turn off the high beam light?

A. Reduce speed for yield or stop on the right side.

B. Continuous change lights to remind the vehicle coming in the opposite direction

C. Turn on the high lights and force the coming car to change the lights

D. Move his sight to the right side to evade the light

Answer: ABC

2. Whats the meaning of the white horizontal solid line in the circle?

A. Turning waiting line

B. Deceleration line

C. Yielding line

D. Stop line

Answer: D

3. When driving a motor vehicle following anther vehicle, What should the driver pay attention to?

A. When following a taxi, it is necessary to prevent it from pulling over at any time to get on and off passengers.

B. For large trucks loaded with goods, we should increase the distance between cars and avoid long time follow ups to prevent the risk of cargo spilling and blind areas.

C. When the current side of the vehicle has an internship sign, it should increase the distance with the vehicle to prevent the front vehicle emergency braking.

D. Follow a vehicle in foggy weather, pay attention to the emergency braking of the front vehicle

Answer: ABCD

4. When a vehicle stops temporarily at the roadside at night, the wrong measure is to ______.

A. Turn on the warning flash light

B. Turn on the contour light

C. Turn on the high beam light

D. Turn off all lights

Answer: CD

5. You can make an U turn at this intersection.

A. Right

B. Wrong

Answer: B

6. Under such circumstances, the driver should stop the vehicle and yield to pedestrians.

A. Right

B. Wrong

Answer: A

7. Having driven his vehicle at 110km/hour on an urban road, Mr. Lin is trying to leave the scene after a rear-end collision but is held back by bystanders. The alcohol concentration in his blood, tested in an alcohol test by the traffic police, is 135.8mg per hundred milliliters. Which of the following law-breaking acts did Mr. Lin commit?

A. Drunk driving

B. Speeding

C. Fatigued driving

D. Hit-and-run driving

Answer: ABD

8. What is the meaning of this sign?

A. A manned level crossing

B. Multi-crossing of railway and road

C. Grade separation level crossing

D. An unmanned level crossing

Answer: A

9. When passing a turn or a curve section, the driver should slow down and disengage the clutch.

A. Right

B. Wrong

Answer: B

10. When using splints, sticks or tree branches to keep the unexposed bones in position, it is necessary that these things should exceed the upper and lower joints of the wound.

A. Right

B. Wrong

Answer: A

11. Which measures is correct when a motor vehicle intends to overtake

A. Use the high and low beam lights alternately to indicate the intention

B. Honk to indicate the vehicle

C. Speed up and overtake on the right side

D. Turn on the left-turn signal in advance

Answer: ABD

12. When passing an intersection, vehicle motor drivers are not allowed to overtake.

A. Right

B. Wrong

Answer: A

13. In which of the following ways can motor vehicles avoid a tire burst?

A. Lowering tire pressure

B. Checking tires regularly

C. Removing foreign matters from the tire tread grooves timely

D. Replacing the tires that have cracks or deep cuts

Answer: BCD

14. When encountering pedestrians slowly cross the road in a residential area, the driver should sound the horn continuously.

A. Right

B. Wrong

Answer: B

15. A driver should accelerate in advance to overtake then it is likely to meet with oncoming vehicles.

A. Right

B. Wrong

Answer: B

16. Why is it dangerous to overtake on a snowy mud road in heavy snow?

A. Snow can increase tire adhesion

B. The flying mud made the sight bad.

C. Long braking distance in case of emergency

D. Pavement under snow and mud is easier to skid.

Answer: BCD

17. What is the meaning of this sign?

A. Embankment road

B. Steep uphill road

C. Continuous up slopes

D. Steep downhill road

Answer: D

18. Which lamp should be used when motor vehicles pass hrough an intersection at night where there is no traffic light signal?

A. High-beam

B. Low-beam

C. Hazard lamps

D. High-beam and low-beam should be used alternatively

Answer: D

19. What is the meaning of this sign?

A. Slippery section

B. Sharp curve

C. Inverse curve

D. Continuous curves

Answer: C

20. Whats the meaning of the double white solid lines in far front of the intersection?

A. Stopping and yield line

B. Slowdown and yield line

C. Left-turn waiting line

D. Waiting to run line

Answer: A