长治科目一英文版题库

1、Which should be taken along while driving?

A、vocational qualification certificate

B、ID card

C、driving license

D、work permits

Answer：C

2、Whats the meaning of the white solid line in the middle of the road?

A、unilateral same direction lanes dividing line that can be crossed

B、same direction lanes dividing line that can not be crossed

C、bilateral same direction lanes dividing line that can be crossed

D、opposite direction lanes dividing line that can not be crossed

Answer：B

3、Use the high and low beam lights alternately when passing the crosswalk at night.

A、Right

B、Wrong

Answer：A

4、Whats the meaning of this sign?

A、accident-prone section

B、construction section

C、reducing speed and going slowly section

D、jammed section

Answer：A

5、When starting up a vehicle stopping at the roadside, the driver should first ________.

A、Depress the accelerator pedal and start

B、Honk

C、Increase engine rotation speed

D、Observe the conditions around the vehicles

Answer：D

6、What kind of marking are the double yellow solid lines in the middle of the road?

A、auxiliary marking

B、warning sign

C、prohibitive marking

D、indicative marking

Answer：C

7、How to run at this position when leaving the expressway?

A、enter the deceleration lane

B、keep running forward

C、keep the speed at 100km/hr

D、reduce the speed to less than 40km/hr

Answer：A

8、When encountering an overflowing bridge, the driver should look at the situation, and passes through slowly before he makes sure that it is safe to do so.

A、Right

B、Wrong

Answer：A

9、Whats the meaning of this sign?

A、no left turn

B、leftt and right turn

C、no leftt and right turn

D、no right turn

Answer：B

10、When a vehicle approaches a crosswalk, the driver should ________.

A、Speed up and pass

B、Stop immediately

C、Honk to indicate the pedestrians to yield

D、Observe the movement of pedestrians and non-motorized vehicles, make sure it is safe before passing

Answer：D

11、When crossing each other at night, how far should change the high beam lights to low beam lights?

A、not need to change lights

B、beyond 150m

C、within 100m

D、within 50m

Answer：B

12、It lights continuously to indicate that engine control system failed.

A、Right

B、Wrong

Answer：A

13、When a vehicle encounters a bike rider coming in the opposite direction on the road, the driver should _________.

A、Continuously change the high and low bean lights

B、Continuously honk

C、Use the low beam light, reduce speed or stop to evade

D、Use the high beam light

Answer：C

14、How to do when encountering slow-moving vehicles in front?

A、follow the vehicles in front

B、occupy the opposite lane to overtake

C、borrow the lane from right side to overtake

D、overtake from both sides as will

Answer：A

15、Whats the meaning of the yellow broken and solid lines in the middle of the road?

A、no crossing the lines on the side of the broken line

B、no crossing the lines on the side of the solid line

C、allowed to cross the lines on the side of the solid line

D、allowed to cross the lines on both sides

Answer：B

16、What marking is the combination of the white broken lines and the triangle area?

A、road entry marking

B、lane-dividing line that can be crossed

C、deceleration line at road exit

D、road exit marking

Answer：D

17、A vehicle should try to speed up after starting from the roadside and rapidly turn left into the traffic flow on the road.

A、Right

B、Wrong

Answer：B

18、At this position, you may speed up to pass through the section.

A、Right

B、Wrong

Answer：B

19、After starting the engine, it lights to indicate that ______

A、fuel pump abnormal or malfunction

B、ignition system malfunction

C、fuel supply system is abnormal

D、fuel in tank reaches the minimum level

Answer：D

20、When driving at night, the driver should try as much as possible to avoid overtaking. When he really needs to overtake, he may switch the high and low beam lights to alert the vehicle in front.

A、Right

B、Wrong

Answer：A