果洛科目四英语pdf

1. When driving on a rough road, the driver should use low gear to keep low speed; try to choose roads with big pits to reduce bumpy feeling.

A. Right

B. Wrong

Answer: B

2. When driving on a road covered with ice and snow, drivers tend to encounter glare caused by reflection of light rays from the road surface.

A. Right

B. Wrong

Answer: A

3. Which measures is correct when a motor vehicle intends to overtake

A. Use the high and low beam lights alternately to indicate the intention

B. Honk to indicate the vehicle

C. Speed up and overtake on the right side

D. Turn on the left-turn signal in advance

Answer: ABD

4. How will the adhesive force of road change when speed increases on a damp and slippery road?

A. Increase sharply

B. Increase gradually

C. Decrease sharply

D. No change

Answer: C

5. Where can not park?

A. Parking lot

B. Parking spaces on roads

C. Landslide and debris flow in Mountainous Areas

D. Crosswalk

Answer: CD

6. What is the meaning of this sign?

A. Bypass from left side

B. Continuous curves

C. Sharp left curve

D. Sharp right curve

Answer: C

7. Keep enough safe distance When a motor vehicle follows another vehicle, because ______.

A. Avoke a rear-end collision

B. The closer you get to the vehicle, the less easy it is to grasp the situation ahead of the vehicle.

C. Enough distance to avoid emergencies

D. Prevent being unable to detect the front vehicle brake in time due to the damage rear lamp of the front vehicle

Answer: ABCD

8. What is the meaning of this sign?

A. U turn

B. Reversing

C. Left turn

D. Bypassing

Answer: A

9. Drivers should wear shoes or boots, which have heels and not skid soles, to ensure the acute, accurate, and reliable gear-shifting by feet.

A. Right

B. Wrong

Answer: A

10. What kind of harmful effect will be brought about by continuously using the foot brake on a long downhill road?

A. Shorten the engine’s service life

B. Make the driver feel tired

C. Easily cause the vehicle to overturn

D. Reduce the braking efficiency

Answer: D

11. According to regulations, motorcycle driver should wear _______.

A. Glasses

B. A special safety helmet

C. Gloves

D. Safety kneepads

Answer: B

12. The continuously flashing yellow light is to warn that the driver should look and make sure it is safe to pass.

A. Right

B. Wrong

Answer: A

13. What is the meaning of this sign?

A. Watch for pedestrians

B. Crosswalk

C. Village or town

D. Primary school

Answer: C

14. A motorcycle driver should wear long-sleeve and long-trouser-leg clothes with brilliant color so that he can be easy found by other transports participants when he is riding.

A. Right

B. Wrong

Answer: A

15. In which of the following ways can motor vehicles avoid a tire burst?

A. Lowering tire pressure

B. Checking tires regularly

C. Removing foreign matters from the tire tread grooves timely

D. Replacing the tires that have cracks or deep cuts

Answer: BCD

16. When a fast-moving vehicle encounters an emergency the driver should turn to evade first and then brake to slow down so as to mitigate the damage.

A. Right

B. Wrong

Answer: B

17. When a gas tanker is leaking heavily, which of the following measures is wrong?

A. Cut off the power

B. Wear gas mask and protect gloves

C. Turn off the valve to stop leaking

D. Evacuate people to the leeward side

Answer: D

18. How should lamps be used when motor vehicle drivers pass through a two-way tunnel?

A. Turn on the hazard lamps

B. Turn on the high-beam

C. Turn on the fog lamp

D. Turn on the low-beam

Answer: D

19. People who take a two-wheeled motorcycle should ride it by side way.

A. Right

B. Wrong

Answer: B

20. What is the purpose of checking before driving?

A. Confirm whether the tyres of motor vehicles are damaged or not

B. Confirm whether there is a safety hazard near the vehicle.

C. Confirm whether there are obstacles around the vehicle

D. Confirm whether the road in front of the vehicle is safe

Answer: ABCD